Strict Standards: Declaration of SubmissionKeywordEntryDAO::getByControlledVocabId() should be compatible with ControlledVocabEntryDAO::getByControlledVocabId($controlledVocabId, $rangeInfo = NULL, $filter = NULL) in /home/revistas/public_html/lib/pkp/classes/submission/SubmissionKeywordEntryDAO.inc.php on line 20
Warning: Cannot modify header information - headers already sent by (output started at /home/revistas/public_html/lib/pkp/classes/submission/SubmissionKeywordEntryDAO.inc.php:20) in /home/revistas/public_html/lib/pkp/classes/template/PKPTemplateManager.inc.php on line 836
Warning: Cannot modify header information - headers already sent by (output started at /home/revistas/public_html/lib/pkp/classes/submission/SubmissionKeywordEntryDAO.inc.php:20) in /home/revistas/public_html/lib/pkp/classes/template/PKPTemplateManager.inc.php on line 837
Numerical and experimental analysis of the behavior of structural elements composed of double lattice panels filled with cast-in-place concrete
| IBRACON Structures and Materials Journal
Numerical and experimental analysis of the behavior of structural elements composed of double lattice panels filled with cast-in-place concrete
Benicio Moraes Lacerda
Universidade Federal de Uberlândia
Faculdade de Engenharia Civil
Maria Cristina Vidigal Lima
Universidade Federal de Uberlândia
Faculdade de Engenharia Civil
Francisco Antonio Romero Gesualdo
Universidade Federal de Uberlândia
Faculdade de Engenharia Civil
Vanessa Cristina Castilho
Universidade Federal de Uberlândia
Faculdade de Engenharia Civil
Abstract
An experimental and numerical investigation was conducted into the factors that interfere in the shear strength of the concrete-concrete interface in structures composed of double lattice panels subjected to direct shear stress. The experimental program consisted of testing 26 direct shear models with varying widths of concrete filling of 7 cm, 9 cm and 13 cm, with smooth and rough interfaces, as well as different concrete compressive strengths in the filled region. The numerical modeling, which was performed with ANSYS software, employed solid finite elements, bar elements and contact elements, taking into account the non-linearity of the materials involved. The analyses of the experimental results under direct shear indicated that the transfer of stresses at the interface occurred with loss of adhesion. The numerical simulations indicated that the higher the geometric ratio of reinforcement the higher the direct shear strength of the structural model. In general, the slip of the models with smooth interfaces was 2 or 3 times greater than the models with rough surfaces. Numerically, the models with smooth interfaces showed a 36.61% gain in shear strength when the compressive strength in the region filled with concrete increased from 20 MPa to 28.4 MPa.